Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide - Manual (Page 53)

5.18 | Design Menu Pro-Stitcher User Manual
Repeat Menu
The Repeat Main function provides several options for repeating a design.
• Select Design, Repeat, and then Main.
The Repeat Wrapping function provides several options for wrapping, or offsetting, designs. Most of these
options can be done with or without a defined area.
• Select Design, Repeat, and then Wrapping.
Using a defined area in conjunction with the Repeat options will stretch, skew, or fit the desired number
of repeats within that area. If an area has not been defined, the options to stretch and fit will be disabled
because they require an area to stretch or fit to.
Repeat Main
To repeat a design
• Press the Plus Sign (+) to increase the number of times you want to repeat a design. To decrease
the number of repeats that appear on-screen, press the Minus Sign (–).
• Alternately, tap on the number box and enter the desired number of repeats into the pop-up num-
ber box. Then press Enter.
NOTE: If the repeated design includes jump points, Pro-Stitcher preserves them when you save the
design.
To change the size of the gap between repeated designs
• Enter a value (in inches) in either the Horizontal Distance box or the Vertical Distance box to
increase the size of the gap between repeated designs. To overlap the designs, enter a negative
value.
Vertical repeat
options: Enter the
number of repeats,
or press the Plus
Sign to increase the
number of repeats
or the Minus Sign to
decrease the number
of repeats.
Horizontal repeat
options: Enter the
number of repeats,
or press the Plus
Sign to increase the
number of repeats
or the Minus Sign to
decrease the number
of repeats.
Increase or decrease the size of the gap
between repeated designs with the
Distance boxes.
GAP
!