Avery Dennison SNAP 500 - Manual (Page 53)

User’s Manual—SNAP™ 500 Gen 1 and Gen 2 53
4.4.5 Resetting the Printer to DHCP Mode
Before moving the printer to a new network, you must reset the printer to DHCP
mode. Otherwise, the automatic connection through DHCP to the new network
will not work.
Access the web browser as described above, and click the Network button. The
window shown above will appear. Click the Reset to DHCP Address button.
4.4.6 Viewing and Changing the Printer Settings
Access the web server by opening a browser on any computer connected to the
network. Enter the printer’s IP address in the address bar and press Enter. The
following window will appear:
The values shown are the current printer settings. To change the settings, click
the Configure button. The following window will appear:
Clicking the “Go Back” button will return to the previous window without making
any changes.
To change any setting, enter the value in the box or select a value from the drop
down list. Click on Apply Changes to change the printer settings. Values that are
grayed out are not changeable.