11 viewing the life counts, 12 firmware version – Avery Dennison SNAP 500 User Manual
Page 48
48
User’s Manual—SNAP™ 500 Gen 1 and Gen 2
4.3.11 Viewing the Life Counts
The SNAP 500 printer maintains a count of the total number of labels printed,
and the total number of inches of material. Also, there is a resettable label
counter.
In the Virtual Control Panel, the Life Counts can be found in the
Versions/History tab. To reset the resettable label counter, click on the Reset
button.
4.3.12 Firmware Version
Check the version of the firmware install by clicking on the Versions/History tab
and noting the Software Version box listed. Use this to verify the firmware version
before upgrading.
Printer ID is the printer serial number.
Actual Printhead Resolution is available for versions that support 600dpi printing.