Avery Dennison SNAP 500 - Manual (Page 4)

User’s Manual—SNAP™ 500 Gen 1 and Gen 2
3.4.1 Selecting the Sensor 34
3.4.2 Aligning the Stock to the Sensor 34
3.4.3 Programming the Contrast Sensor 34
3.4.4 Using the Web Guide Hole Sensor 34
3.5 Option Menu System 35
3.5.1 Running Test Patterns 35
3.5.2 Setting / Adjusting Voice Button Volume 37
4.0 MAKING ADJUSTMENTS 39
4.1 Print Head Adjustments 39
4.1.1 Adjusting Print Head Pressure 39
4.1.2 Adjusting Density (Darkness) 40
4.2 Adjusting the Stacker 40
4.2.1 Stacker Position 41
4.2.2 Stacker Angle 41
4.2.3 Platform Angle 42
4.2.4 Height of Stack - Stacker Sensor 42
4.3 Virtual Control Panel 43
4.3.1 Introduction 43
4.3.2 Changing Printer Settings in PCMate 44
4.3.3 Print/Cut Adjust Tab 44
4.3.4 Selecting the Printer Language 45
4.3.5 Setting the Date and Time 46
4.3.6 Enabling or Disabling the Cutter 46
4.3.7 Selecting the Print Speed 46
4.3.8 Selecting the Flagging Mode 47
4.3.9 Selecting the Sense Mark Type 47
4.3.10 Setting the Default Transfer Type 47
4.3.11 Viewing the Life Counts 48
4.3.12 Firmware Version 48
4.3.13 Print Quality 49
4.3.14 Other information on VCP 49
4.4 Web Server 50
4.4.1 Setting the Printer IP Address 50
4.4.2 Obtaining a DHCP Address 50
4.4.3 Determining the DHCP Address 51
4.4.4 Converting the DHCP Address to a Static Address 52
4.4.5 Resetting the Printer to DHCP Mode 53
4.4.6 Viewing and Changing the Printer Settings 53
4.4.7 Troubleshooting the Network Connection 54
5.0 MAINTENANCE 55
5.1 Print Head Cleaning and Handling 55
5.1.1 Handling Techniques 55
5.1.2 Cleaning Procedures 56
5.2 Print Head Replacement 56
5.3 Lubrication 59
5.4 Rotary Knife Assembly 59
5.4.1 Removing and Replacing the Knife Assembly 59
5.4.2 Adjust the Knife Home Position 61
5.5 Knife Blade Cleaning 61