Pilz PMCprotego D.72/000/0/0/2/208-480VAC - Manual (Page 123)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-15
6.6 Power element
6 Wiring
6.6 Power element 6600 Power element 6- 6.6.1 Mains voltage
Mains voltage 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
 Cable cross sections
 Insulation material
][Verdr_Netz_protego_D_48_D72
Please note the following important points under “Mains voltage”, in the
chapter entitled “Function Description”:
 The mains voltage requirements (network configurations)
 The use of isolating transformers
Connector pin assignment
Connector X0 Designation Description
PE Earth conductor
L3 Mains voltage phase L3
L2 Mains voltage phase L2
L1 Mains voltage phase L1
Connection
Mains voltage for power element Three-phase
Use a line choke if the mains voltage
imbalance is > 3% (type: 3L, u
k
=
2%)
The line choke (accessory) should be
insulated on the mounting plate
X0
PE L3 L2 L1
L3
PMCprotego X0
L1
L2
PE
L3
L1
L2
PE
FN3
FN1
FN2
L3
PMCprotego X0
L1
L2
PE
L3
L1
L2
PE
FN3
FN1
FN2