Pitney Bowes DI950 FastPac Inserter - Manual (Page 84)

3-42 SV61311 Rev. E
3 • Basic Operation
Adding an Item
(continued)
5. If you selected "Add Outer Envelope" the Add Envelope screen displays.
a. Use the Screen Option Keys to define the new envelope parameters.
b. Select the desired item characteristics.
c. Press "Accept" when you are done.
6. If you want to add more items, repeat steps 1 through 5, as necessary,
for each new item.
NOTE: If you decide that you don't want the changes that you've made,
press CANCEL. The Confirm Cancel prompt displays. Press "Don't Keep
Changes" to discard the new entries. You will be returned to the Edit Job
screen.
7. To retain your changes for this job, select "Accept" in the Edit Job
screen. To store the job changes permanently, select "Save Job" in the
Menu screen. You must have supervisor or manager access rights to
save a job.
NOTE: Recheck the Mail Piece Icon Tree. Moving an item can cause the
Feeder assignment to change. If it does, be sure to load the designated item
into the correct Feeder.