Pitney Bowes DI950 FastPac Inserter - Manual (Page 144)

7-18 SV61311 Rev. E
7 • Add-On Modules
Belt Stacker - Letter or Flats Mail
The OptiFlow ™ Belt Stacker can be used in Right Angled or In Line configu-
ration with the DI900 and DI950 inserters.
There are two setups for In Line operation: One for ‘letters’ (e.g. #10) sized
envelopes, and another for ‘flats’ (e.g. #9) sized envelopes. In Line mode is
essential for running ‘flats’.
Tandem Belt Stacker - Letter and Flats Mail
A particular configuration of the stacker is available for the DI900 and DI950
inserters that allows automatic stacking of ‘Letters’ and ‘Flats’ simultaneous-
ly. The stacker consists of two stacker units mounted onto one set of legs or
one table at the correct vertical spacing to receive ‘Letter’ and ‘Flats’ output
from the Inserter.
Refer to the OptFlow™ Belt Stacker Operator Gude (SV40231) for detailed
information about the belt stacker and the tandem belt stacker.
OptiFlow ™ Belt
Stacker
OptiFlow ™
Vertical Power
Stacker
The Optiflow ™ Vertical Power Stacker is a compact, powered, bottom-feed
stacker that connects to the output of several Pitney Bowes Document In-
serting Systems, including the DI900 and DI950 inserters. It neatly stacks
the mail pieces fed from the inserter and keeps them in the same order as
they were originally loaded. Sensors in the stacker monitor the mail pieces
fed into it; if a mail piece should stall or the stacker fills up, the inserter stops
automatically.
The stacker is designed for continuous unloading during mail runs to main-
tain best productivity. Unloading "on-the-fly" keeps your mail run going and
helps avoid unnecessary interruptions.
Refer to the OptFlow™ Vertcal Power Stacker DIVS Operator Gude
(SV61322) for detailed information about the vertical power stacker.
Exit Transport The Exit Transport assembly extends the path of the letter envelope exit
beyond the distance needed for flats stacking below. The Exit Transport
connects to the inserter and can be mounted to other output devices while
maintaining flats envelope functionality.
The Exit Transport also provides optimum operator access to the High Ca-
pacity Envelope Feeder (HCEF) in certain configurations.