Pitney Bowes DI950 FastPac Inserter - Manual (Page 142)

7-16 SV61311 Rev. E
7 • Add-On Modules
4. Ensure that the mailing system has been set up to process mail:
• The class must be set.
• The rate/weight must be set.
• The mode must be set (if appropriate).
NOTE: Refer to the Operator Guide for you mailing system for more informa-
tion about processing mail.
5. Adjust the side guide to the width of an envelope that will be used. See
figures below for DM800i ™ requirements.
NOTE: The MMI does not support flats.
Figure 7.15: DM800i ™ Side Guide
DM800i ™ Side Guide
(shown without MMI)