EXFO FTB-800 Series for FTB-1 - Manual (Page 27)

Physical Interfaces and LEDs
NetBlazer 17
8.5G-11.3G (PORT #1)
8.5G-11.3G (PORT #1)
The 8.5G-11.3G PORT #1 can be used for optical Transport, Ethernet, Fibre
Channel, or Packet Sync test applications.
Supported rates:

For Transport Optical Interface: OC-192/STM-64, OTU2, OTU1e, OTU2e,
OTU1f, and OTU2f.

For Ethernet Optical Interface: 10Gbit/s LAN and 10Gbit/s WAN.

For Fibre Channel Optical Interface: 8X/10X (Fibre Channel).

For Packet Sync Optical Interface: 10Gbit/s LAN.
Plug the SFP+ module into the 8.5G-11.3G PORT #1 slot on the module.
Note: Use only EXFO supported transceivers. Refer to the SFP+ 10G SONET/SDH
and OTN Optical Interfaces on page 509 for the list of supported
transceivers. Using non-supported transceivers can affect the performance
and accuracy of the test.
Note: Do not replace a SFP+ while the test is running to avoid distorting statistics.
First stop the test case, replace the SFP+ and then restart the test.