Isdn pri - call management, Call origination settings – EXFO FTB-800 Series for FTB-1 User Manual
Page 153
Test Setup - Test Configurator, Timer, and System
NetBlazer
143
ISDN PRI - Call Management
ISDN PRI - Call Management
From the Test menu, tap Setup, Test Configurator, the test block, and the
Call Management tab.
Call Origination Settings
Channel Identification
The channel buttons allow the selection of a channel for call
origination configuration. The selected channel has its button
highlighted with a blue border. D-Ch indicates the channel
configured as D-Channel and is not selectable.
A warning icon is displayed on each channel button for which
either the originator and/or destination number is not defined.
Call All at Start check box when selected, initiates calls for all
configured channels when the test is started.
Calling Party and Called Party defines respectively the originator and
destination call information.
Numbering Plan choices are Unknown, ISDN/Telephony
(default), or Private.
Numbering Type choices depend on the Numbering Plan and
DS1/E1 Switch Type selected.