EXFO FTB-800 Series for FTB-1 User Manual
EXFO Measuring instruments
This manual is related to the following products:
Table of contents
Document Outline
- Certification Information
- 1 Introducing the Ethernet and Multiservice Tester
- 2 Safety Information
- 3 Getting Started
- 4 Physical Interfaces and LEDs
- FTB-810 and FTB-810G Modules
- FTB-860, FTB-720G, and FTB-730G Modules
- FTB-860G Module
- FTB-860GL Module
- FTB-870, FTB-720G+, and FTB-730G+ Modules
- FTB-880 Module
- Port Availability on the NetBlazer Modules
- 100M-4.25G (PORT #1/#2)
- 8.5G-11.3G (PORT #1)
- 155M-2.5G (PORT #1)
- 10G (PORT #1)
- ETHERNET 10G (PORT #1)
- ETHERNET 100/1000M (PORT #1/#2)
- ETHERNET 10/100/1000M
- 2M-155M (PORT #1)
- 2M-52M (PORT #2)
- 1.5M/2M (PORT #1/#2)
- Headset/Microphone Port (FTB-1)
- AUX Connection
- Fibre Cables Connection
- EXT CLK
- LEDs
- 5 Graphical User Interface Overview
- 6 Test Setup - Test Applications
- 7 Selecting and Starting a Test
- 8 Test Setup - Test Configurator, Timer, and System
- Test Configurator Overview
- Modify Structure Button
- Signal Auto-Detect
- 1588 PTP
- BERT
- Cable Test
- SFP/SFP+
- Clock
- EtherBERT and Unframed BERT
- EtherSAM - Burst
- EtherSAM - Global
- EtherSAM - Ramp
- FTFL/PT
- Global (Fibre Channel)
- Interface (Ethernet)
- Interface - Port (Fibre Channel)
- ISDN PRI - Call Management
- ISDN PRI - ISDN Settings
- Labels
- MAC/IP/UDP
- Network
- RFC 2544 - Global
- RFC 2544 - Subtests
- S-OAM
- Services - Global
- Services - Profile
- Signal (Transport)
- Signal - Signal Configuration (DSn/PDH)
- Signal - Signal Configuration (OTN)
- Signal - Signal Configuration (SONET/SDH)
- Smart Loopback
- Streams - Global
- Streams - Profile
- SyncE
- System
- TCP Throughput
- Timer
- Traces (OTN)
- Traces (SONET/SDH)
- 9 Test Results
- Alarms/Errors Overview
- Alarms/Errors
- FTFL/PT
- Graph (RFC 2544)
- ISDN Logger
- Labels
- Logger and Alarms/Errors Logger
- MPLS
- Performance Monitoring
- PTP Stats
- Quality Level (1588 PTP)
- Quality Level (SyncE)
- S-OAM
- Service Configuration - Burst
- Service Configuration - Ramp
- Service Performance
- Streams - Frame Loss / Out-of-Sequence
- Streams - Jitter
- Streams - Latency
- Streams - Throughput
- Summary
- Summary (1588 PTP)
- Summary (Cable Test)
- Summary (EtherSAM)
- Summary (FC BERT)
- Summary (ISDN PRI)
- Summary (NI/CSU Emulation)
- Summary (RFC 2544)
- Summary (S-OAM)
- Summary (SyncE)
- Summary (TCP Throughput)
- Summary (Traffic Gen & Mon)
- Traces - OTN
- Traces - SONET/SDH
- Traffic - Ethernet
- Traffic - Flow Control
- Traffic - Graph
- Traffic - S-OAM
- WIS
- 10 Test Functions
- 11 Test Control
- 12 Power Failure Recovery
- 13 Suspend and Resume
- 14 Maintenance
- 15 Troubleshooting
- 16 Warranty
- 17 Specifications
- General Specifications
- SFP SONET/SDH and OTN Optical Interfaces
- SFP+ 10G SONET/SDH and OTN Optical Interfaces
- DSn/PDH and SONET/SDH Electrical Interfaces
- SFP CPRI/OBSAI Optical Interface
- SFP Ethernet Optical Interfaces
- SFP+ Ethernet Optical Interfaces
- Ethernet Electrical Interfaces
- SFP Fibre Channel Interfaces
- SFP+ Fibre Channel Interfaces
- Synchronization Interface
- 18 Glossary
- Index