Cisco 15327 - Manual (Page 142)

9-8
Ethernet Card Software Feature and Configuration Guide, R7.2
Chapter 9 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling
VLAN-Transparent and VLAN-Specific Services Configuration Example
bridge 30 protocol ieee
!
!
interface GigabitEthernet0
no ip address
no ip route-cache
mode dot1q-tunnel
bridge-group 10
bridge-group 10 spanning-disabled
!
interface GigabitEthernet0.3
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
!
interface POS0
no ip address
no ip route-cache
crc 32
!
interface POS0.1
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
!
interface POS0.3
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
Example 9-4 applies to ML-Series card B.
Example 9-4 ML-Series Card B Configuration
hostname ML-B
!
bridge 10 protocol rstp
bridge 30 protocol ieee
!
!
interface GigabitEthernet0
no ip address
!
interface GigabitEthernet0.3
encapsulation dot1Q 30
bridge-group 30
!
interface GigabitEthernet1
no ip address
shutdown
!
interface POS0
no ip address
crc 32
!
interface POS0.1
encapsulation dot1Q 10
bridge-group 10
!
interface POS0.3
encapsulation dot1Q 30
bridge-group 30
!