Cisco 15327 - Manual (Page 582)

Index
IN-12
Ethernet Card Software Feature and Configuration Guide, R7.2
configuring 22-7
overview 22-4
configuration examples 22-13
configuration guidelines 22-6
default configuration 22-6
groups 22-6, 22-9
hosts 22-6
informs
and trap keyword 22-10
described 22-5
differences from traps 22-5
enabling 22-12
limiting access by TFTP servers 22-13
manager functions 22-3
notifications 22-5
overview 22-1, 22-4
status, displaying 22-14
system contact and location 22-12
trap manager, configuring 22-11
traps
configuring 21-16
described 22-1, 22-5
differences from informs 22-5
enabling 22-10
ifIndex number, determining 21-18
overview 22-2, 22-4
types of 22-10
users 22-6, 22-9
versions supported 22-3
snmp-server community command 22-8
snmp-server contact command 22-12
snmp-server enable traps command 22-11
snmp-server engineID command 22-9
snmp-server group command 22-9
snmp-server host command 22-11
snmp-server location command 22-12
snmp-server queue-length command 22-12
snmp-server tftp-server-list command 22-13
snmp-server trap-source command 22-12
snmp-server trap-timeout command 22-12
snmp-server user command 22-10
SNMPv2C 22-3
soft-reset 24-2, 25-2
soft reset on ML-Series 3-2
SONET alarms 5-6
source 23-8
sparse mode, PIM 11-34
SSH, configuring 19-3
startup configuration file 3-9
start-up configuration file restoration 3-11
static routes, configuring 11-31
statistics
RMON group Ethernet 21-6
RMON group history 21-5
SNMP input and output 22-14
statistics, OSPF 11-19, 11-32
STP
BPDU message exchange 7-2
configuring
forward-delay time 7-20
hello time 7-19
path cost 7-18
port priority 7-17
root switch 7-17
switch priority 7-19
default configuration 7-16
designated port, defined 7-3
designated switch, defined 7-3
disabling 7-16
displaying status 7-20
extended system ID
overview 7-4
unexpected behavior 7-17
forward-delay time 7-6
inferior BPDU 7-3
interface states
blocking 7-6
disabled 7-7