Related documentation – Cisco 15327 User Manual
Page 30

xxx
Ethernet Card Software Feature and Configuration Guide, R7.2
About this Guide
•
Chapter 21, “Configuring RMON,”
describes how to configure remote network monitoring (RMON)
on the ML-Series card.
•
Chapter 22, “Configuring SNMP,”
describes how to configure the ML-Series card for operating with
Simple Network Management Protocol (SNMP).
•
Chapter 23, “E-Series and G-Series Ethernet Operation,”
details and explains the features and
operation of E-Series and G-Series Ethernet cards for the ONS 15454, ONS 15454 SDH and
ONS 15327 platform.
•
Chapter 24, “CE-100T-8 Ethernet Operation,”
details and explains the features and operation of
CE-100T-8 Ethernet card .
•
Chapter 25, “CE-1000-4 Ethernet Operation,”
describes the operation of the CE-1000-4 card.
•
Appendix A, “Command Reference,”
is an alphabetical listing of unique ML-Series card Cisco IOS
commands with definitions and examples.
•
Appendix B, “Unsupported CLI Commands,”
is a categorized and alphabetized listing of Cisco IOS
commands that the ML-Series card does not support.
•
Appendix C, “Using Technical Support,”
instructs the user on using the Cisco Technical Assistance
Center (Cisco TAC) for ML-Series card problems.
Related Documentation
Use the Ethernet Card Software Feature and Configuration Guide, R7.2 in conjunction with the
following general ONS 15454 or ONS 15454 SDH system publications:
•
Cisco ONS 15454 Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 node and
network.
•
Cisco ONS 15454 SDH Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 SDH node and
network.
•
Cisco ONS 15454 Reference Manual
Provides detailed card specifications, hardware and software feature descriptions, network topology
information, and network element defaults.
•
Cisco ONS 15454 SDH Reference Manual
Provides detailed card specifications, hardware and software feature descriptions, network topology
information, and network element defaults.
•
Cisco ONS 15454 Troubleshooting Guide
Provides alarm descriptions, alarm and general troubleshooting procedures, error messages, and
performance monitoring and SNMP parameters.
•
Cisco ONS 15454 SDH Troubleshooting Guide
Provides general troubleshooting procedures, alarm descriptions and troubleshooting procedures,
error messages, and performance monitoring and SNMP parameters.
•
Cisco ONS SONET TL1 Command Guide
Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions,
and modifiers for the Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL, and ONS
15310-MA systems.