beautypg.com

Monitoring and verifying ip multicast operation, Table 11-10 – Cisco 15327 User Manual

Page 193

background image

11-35

Ethernet Card Software Feature and Configuration Guide, R7.2

Chapter 11 Configuring Networking Protocols

Monitoring and Verifying IP Multicast Operation

Monitoring and Verifying IP Multicast Operation

After IP multicast routing is configured, you can monitor and verify its operation by performing the
commands listed in

Table 11-10

, from privileged EXEC mode.

Table 11-10

IP Multicast Routing Show Commands

Command

Purpose

Router# show ip mroute

Shows the complete multicast routing table and the combined
statistics of packets processed.

Router# show ip pim neighbor

When used in EXEC mode, lists the PIM neighbors
discovered by the Cisco IOS software.

Router# show ip pim interface

Displays information about interfaces configured for PIM.

Router# show ip pim rp

When used in EXEC mode, displays the active rendezvous
points (RPs) that are cached with associated multicast routing
entries.