beautypg.com

TeeJet TASC-6100 User Manual

Page 84

background image

C-4

TASC 6100

98-05018

R2

CE & S

TANDARD

V

ERSION

Product – Refers to the material that is to be metered

and therefore controlled by the Control Console.
This material can be grouped into the following
categories:

Liquid – Includes, but is not limited to, liquid

fertilizer, liquid fertilizer with chemical, water,
water with chemical, liquid lime, deicing solu-
tions, salt solutions, liquid manure, etc.

Chemical – Includes, but is not limited to, herbicide,

liquid fertilizer, spray adjuvants, fungicides,
insecticide, etc.

NH

3

– (Anhydrous Ammonia) A fertilizer material

that is condensed from a gas to a liquid in order to
be metered. Density of this material is entered into
the equation in order for pounds of Nitrogen to
be targeted and recorded.

Returned Material Authorization Number (RMA) -

A number obtained from Mid-Tech or your dealer,
which serves as your approval to return the item
and informs Mid-Tech of the circumstances of the
return so that proper action (repair, replacement,
credit, etc.) can be initiated quickly upon receit of
the item at Mid-Tech.

Swath – A boom section or group of boom sections

that should accumulate area and volume as a group.

Sparge - The process of routing excess product pump

output back to the product tank for agitation to keep
dissolved products in suspension.

Valve Driver Module - An electronic circuit, usually

enclosed in a “potted boot” attached to a cable. This
unit acts as an interface between the console control
signals and the actual drive signals to the valve.