Clear errors / reset node, Update configuration, Clear errors / reset node update configuration – PRG V676 User Manual 3.5 User Manual
Page 63

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
45
Clear Errors / Reset Node
Nodes can be reset from the System Configuration screen.
To clear or reset node:
Step
1. Press
nodes
.
Step
2. Press button of required Node.
Step
3. Press
Clear Errors
and/or
Reset
as required.
Update Configuration
In the event a new device(s) is added to your system while the console is powered up, the system can be repolled so
that the new device(s) will appear in the System Configuration window.
Note: This is not related to the Stored Configuration.
To update a configuration:
+
At Special menu, select Update Configuration.
This manual is related to the following products: