PRG V676 User Manual 3.5 - Manual (Page 128)

110 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
TIMING FILTER
Overview
The Timing Filter is used to control the duration, delay, and speed of parameter transitions. For example, timing can
be used to define how fast a luminaire will pan from one position to another and how long it will take for its intensity to
fade from 0 to 100 percent.
Timing (total transition time), delay, and speed values can be applied to any and all combinations of parameters within
a cue. Timing
or speed can be entered along with a delay, but not both. These values can be different for each
parameter of each luminaire as required.
Example :
Cue 1 contains Luminaire 1 and Luminaire 2.
A different timing value can be applied to each of Luminaire 1’s parameters. For instance, Focus = 2:00,
Edge = 00.30, Zoom = 1:30, and Color = 00:15.
Different timing values can be applied to Luminaire 2’s parameters. For instance, Focus = 4:00, Edge = 03.30,
Zoom = 2:45, and Color = 01:15.
20 Timing Templates
Timing Filter Grid
Toggles between
Page 1 and Page 2
Selects All on page
Clears Selections on page
Close Screen Button
Sends Timing to Cues
Selects All Filters (pages 1 &2)
Clears All Filters (pages 1 &2)