PRG V676 User Manual 3.5 - Manual (Page 204)

186 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Step 6. Press [Set Point 1] button.
Step 7. Using palettes, choose second point.
Step 8. Press either of the [Set Point 2] buttons as desired. Dynamic will begin running.
Step 9. Modify as necessary. (Refer to "Storing Dynamics in the Dynamics Palette" on page 187.)
Note: Size cannot be modified for point-to-point dynamics. This will result in undesirable actions.
Step 10. Store as Dynamics palette item, cue, or preset.