PRG V676 User Manual 3.5 - Manual (Page 129)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 111
Time/Speed Formats
Time
Time controls the duration of change for any parameter.
Guidelines:
+ Each parameter can have an individual time.
+ Intensity can have both an up and down fade time. The direction of the intensity transition at the time of playback
determines which of those two values is used.
+ Cue timing includes the movement of longest duration (combination of delay and time) and the longest intensity
transition (combination of delay and up/down fade time).
+ Filtered values contribute to these times.
+ Masked values do not contribute to these times.
+ A parameter cannot have both a time and a speed although it can have a time and delay, or speed and delay.
Time is entered at the keypad in minutes and seconds, seconds, or seconds and tenths of seconds. (Maximum time
entry is 59:59.)
Entering whole numbers will be interpreted as total seconds:
+ [2] [5] = 25.00 (25 seconds)
+ [9] [0] = 90.00 (90 seconds)
A colon (:) is entered by pressing [.] [.]:
+ [2] [.] [.] [5] = 2:05 (2 minutes, 5 seconds)
Fractions of seconds are entered by pressing [.]:
+ [1] [ . ] [3] = 1.3 (1.3 seconds)
+ [.] [5] = .5 (1/2 second)
+ [3] [5] [.] [5] = 35.5 (35 and 1/2 seconds)
Delay
Delay time begins counting from cue execution and delays the playback of any parameter.
Speed
Speed is the rate of change for any parameter.