PRG V676 User Manual 3.5 - Manual (Page 306)

288 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Separators
Separators can be inserted into the Cue Sheet list in order to organize certain groups of cues as necessary. The
separators can then be used as markers to quickly access the first cue of each group.
Insert a separator:
Step 1. At Cue Sheet, use cursor to select cue
above where you wish to insert separator.
Step 2. At Cue Sheet pop-up menu, select New
Separator. A separator will be inserted.
Step 3. Type name of separator.
Step 4. Press [Enter].
Go to specified separator:
+ At Cue Sheet window, select separator by name
from pop-up menu. Cue Sheet will scroll to
beginning of separator line.
Renumbering Cues
The cue number field is editable.
Note: The Move function also effectively renumbers cues. (Refer to "Copy/Move" on page 225).
Submasters Track Mode
The submaster Track mode, specifies which submaster the cue sheet will follow. The window selection will reflect the
active cue in the submaster selected at the Track pull-down menu. When cues are loaded or advanced in that
submaster, the Cue Sheet window will reflect the changes.
Separator Line
Separator Pop-up Menu -
Used to add, delete or scroll list to
Separator Name
any separator by choosing name.
Separators in Cue List
Track Selection