PRG V676 User Manual 3.5 - Manual (Page 222)

204 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Duration
Duration determines how long an effect will run.
+ None - The effect will run infinitely until manually stopped.
+ Cycles - The effect will run a specified number of times (cycles) then stop. It will then await manual restart or go to
the next event.
+ Time - The effect will run a specified length of time before fading out. In this case, the intensity will fade out in the
time specified by the Fade Out time. Note that only effects which have
intensity included, will respond to this
value. In addition, if another submaster has intensity for those channels, Highest Takes Precedence rules apply.
Refer to
"HTP (Highest Takes Precedence)" on page 322.)
Changing Effect Attributes
Attributes are specified at the main Effect Edit screen:
Change effect attributes:
Step 1. At Effects palette, select an effect to be edited. (A white box will appear around the selected item.)
Step 2. Change attributes by touching Forward, Reverse, Oscillate, Random, etc. (A yellow box will appear around
the newly selected item.)
Step 3. Press and hold [Store] while pressing

Effect Select Button

to store changes.