Playing back a canned dynamic – PRG V676 User Manual 3.5 User Manual
Page 195

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
177
Playing Back a Canned Dynamic
This section provides instructions for applying dynamics to channels for immediate playback.
To play back a dynamic:
Step
1. Select required channels.
Step
2. At front panel, bring up Dynamics palette.
Step
3. Press Edit icon to bring up Dynamics super palette.
Step
4. At Dynamics palette, select a canned dynamic. (A white box will appear around the selected item.) The
dynamic will be immediately applied to the selected channels and will begin running.
Step
5. At soft encoders, press [Dynam] button to map dynamic options to encoders. Adjust Rate, Size, and Offset
by turning encoders. (Refer to
"Using the Encoders with Dynamics"
on page 179 for more detailed
information.)
Edit Icon -
Press to open
Dynamics Super Palette