PRG V676 User Manual 3.5 - Manual (Page 238)

220 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
ADVANCED CONTROL
Manual Timing
The Manual Timing feature is used to apply parameter times manually. While Manual Timing is active, any manual
changes via the palettes or the encoder buttons will follow the timing currently active in the luminaire. (Manual Timing
is an alternate control state. It will be active until de-selected.)
Activate Manual Timing using front panel button:
Step 1. At front panel, press [Manual Timing] toggle button (button will flash).
Step 2. Press button again to deactivate mode.
Activate Manual Timing using Timing Filter:
Step 1. At Timing Filter, press

Manual Time

button.
Step 2. Press button again to deactivate mode.
Activate Manual Timing using menu:
Step 1. At Special menu, select Manual Timing.
Step 2. Select Manual Timing again to deactivate mode.
Manual Timing
Toggle Button