Moniteur 50 Series SMART Positioners - Manual (Page 99)

Technical Data
6-1
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
Technical Data
General data: basic instrument 6DR400x–xx (without PROFIBUS PA) and 6DR410x–xx
(with PROFIBUS PA)
Climatic category IEC 721
Storage 1K5 but – 40
°
C to + 80
°
C 1)
Transport 2K4 but – 40
°
C to + 80
°
C 1)
Operation without purging air 3K3 but – 30
°
C 3) to + 80
°
C 2)
with purging air 3K4 but – 30
°
C 3) to + 80
°
C 2)
Degree of protection IP65 acc. to EN60529
Dimensions plastic housing see Fig. 3-2
metal housing see Fig. 3-4
Weight basic instrument plastic approx 0.9 kg
metal approx. 1.3 kg
Resistance to vibration 5 g acc. to IEC 48–2–6 with NAMUR mount-
ing
8 g (10 g) acc. to IEC 48–2–6 with ARCA
mounting or “rotary actuator”
4)
Termination system
electrical signals screw terminals 1.5 AWG14
cable gland PG 13
pneumatic signals internal thread G 1/4 DIN 45141
Mounting position any, outlet air opening and controller output
axis not upwards
Material housing plastic fibre–glass reinforced polyester
metal anodized Gk–Al Si 7Mg
pneumatic connection block
for plastic housing anodized Al Mg Si < 6
CE symbol conforms to EMC directive 89/336 EEC in
accordance with the following standards
Emitted interference EN 50 081–1
Immunity to interference EN 50 082–2 and NAMUR NE21 May 93
1) When commissioning at v 0
°
C, ensure the valves are purged with the dry medium for a sufficiently long period
2) See technical data for basic instrument and option for ex-proof instruments
3) Reduced refresh rate of the LCD display below –10
°
C
4) To 100 Hz
6