Moniteur 50 Series SMART Positioners - Manual (Page 63)

Operation
4-1
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
Operation
This Section describes operation of the positioner.
4.1 Display
The LC display has two lines of text. Each line is segmented differently;
the elements of the upper line consist of 7 and those of the lower line of
14 segments. The display depends on the mode selected (see
Section 4.3).
☞
Note
If the positioner is operated in zones with temperatures below –10
°
C,
the liquid crystal display becomes slow and the refresh rate of the dis-
play slows down considerably.
4.2 Control pushbuttons
The instrument is operated using 3 pushbuttons (Fig. 4-1), whose func-
tion depends on the mode selected.
1
2 3 4
1 Display
2 Mode button
3 Decrement button
4 Increment button
Fig. 4-1 Display and control buttons of the positioner
4