Moniteur 50 Series SMART Positioners - Manual (Page 5)

Information for the Operator
0-1
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
Information for the Operator
Dear customer,
Before you start work, please read this manual! It contains important
information and data that you must observe to ensure the availability of
the device and save yourself service costs. This will make it consider-
ably easier to use this control equipment and lead to reliable results.
You have acquired a device that can be set up in different configura-
tions:
❑ SIPART PS2 without PROFIBUS PA 6DR400x–xx
❑ SIPART PS2 with PROFIBUS PA 6DR401x–xx
This manual takes each of these possibilities into consideration. Any
differences between the devices are indicated specially.
0.1 General information
The product described in this manual left the factory in a perfectly safe
and tested condition. To maintain this condition and to achieve perfect
and reliable operation of this product, it must only be used in the way
described by the manufacturer. Successful and safe operation of this
equipment is dependent on proper handling, installation, operation and
maintenance.
This manual contains the information required for use as intended of
the product it describes. It is addressed to technically qualified person-
nel specially trained or having relevant knowledge of instrumentation
and control technology, hereafter called automation technology.
Familiarity with and proper technical observance of the safety notes
and warnings contained in this manual are essential for safe installation
and commissioning and for safety in operation and maintenance of the
product described. Only qualified personnel as defined in Section 0.3
has the necessary specialist knowledge to interpret the general safety
notes and warnings given in this document in specific cases and to
take the necessary action.
0