Moniteur 50 Series SMART Positioners - Manual (Page 8)

Information for the Operator
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01 0-4
0.4 Use as intended
Use as intended for the purpose of this manual means that this product
must only be used for the applications described in the technical de-
scription (see also Section 3 of this manual).
The product described in this manual has been developed, manufac-
tured, tested and documented observing the relevant safety standards.
If the handling rules and safety information for configuration, installa-
tion, use as intended and maintenance are observed, there is normally
no danger with regard to material damage or for the health of person-
nel. Extra low voltages that are connected must be fed in by safe isola-
tion.
0.5 Technical documentation
In addition to this manual, the following documentation is also supplied
with the instrument:
❑ Leaflet “Operation – Concise Overview”
Order No. C73000–B7400–C151 (German) without PROFIBUS PA
Order No. C73000–B7476–C151 (English) without PROFIBUS PA
Order No. C79000–B7400–C160 (German) with PROFIBUS PA
Order No. C79000–B7476–C160 (English) with PROFIBUS PA
explains in visualized form the principle of operation and parameter-
ization and automatic commissioning.
❑ “Assembly and Installation Instructions”
Order No. C79000–M7474–C156 (German/English)
contains the information required for assembly and installation.
It is an Instruction Manual as defined in the Directive of the Council
of the European Communities dtd. 23 March 1994 (94/9/EC).
0.6 Warranty information
We should like to point out that the content of this manual is not part of
and does not modify a previous or current agreement, undertaking or
legal relationship. Siemens is bound solely by the contract of sale,
which also contains the complete and exclusive warranty. The contrac-
tual warranty conditions are neither extended nor restricted by this
document.