4 accessories – Moniteur 50 Series SMART Positioners User Manual
Page 37
Design and Method of Operation
2-19
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
2.5.4 Accessories
Y1
PZ
PZ
Y1
Y2
Fig. 2-15
Manometer block (left for single-acting, right for double-acting actuators)
The manometer block for single-acting actuators contains two manom-
eters that are screwed to the lateral pneumatic connection of the posi-
tioner using O–rings. The values for input pressure (inlet air PZ) and
output pressure (positioning pressure Y1) are displayed.
The manometer block for double-acting actuators contains three ma-
nometers that are screwed to the pneumatic connections using O–
rings. The values for input pressure (inlet air PZ) and output pressure
(positioning pressure Y1 and Y2) are displayed.
Manometer block