Moniteur 50 Series SMART Positioners - Manual (Page 84)

Operation
4-22
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
4.5 Operation via PROFIBUS PA
Operation is performed using the SIMATIC PDM software package and
a personal computer, programming device (PG), or laptop meeting the
following minimum requirements:
❑ Programming device (PG), laptop, or PC (compatible with industrial
standard) with80486 processor (or higher)
❑ RAM capacity: at least 32 MB
❑ 70 MB required on the hard disk
❑ A VGA monitor or other monitor that is supported by Microsoft Win-
dows
❑ Keyboard and optional but recommended mouse that is supported
by Microsoft Windows
❑ A CD–ROM drive
❑ A 3.5” diskette drive
❑ An optional printer (is recommended)
❑ Interface CP5411 or CP5511 or CP5611
❑ Windows 95 or Windows NT
❑ SIMATIC PDM V4.02 (SIMATIC STEP 7 OEM included)
❑ SIMATIC PDM integrated V4.02 (STEP 7 V4.02 required)
❑ Operation of SIMATIC PDM is supported by the integrated auxiliary
function.
Control is performed by the master class 1 of the control system.
The control system requires the device–specific Device Master Data
File (GSD) to establish a connection with the field devices.
The SIPART PS2 with PROFIBUS PA works with the standard GSD in
accordance with the device profile for actuators. All profile files and
those of the Siemens devices are already stored in the Siemens control
system. If the GSD is required nevertheless, it can be downloaded from
the Internet as described below; it is also printed in the Appendix.
Hardware
Software
Cyclic services