Moniteur 50 Series SMART Positioners - Manual (Page 31)

Design and Method of Operation
2-13
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
To open the instrument you must first remove the 4 screws of the hous-
ing cover using a cross-head screwdriver.
Disconnect the power supply cables.
Remove the module cover (1). To do this you must first remove the 2
screws (9) with a screwdriver.
☞
Note
To prevent premature wear to the fixture by the self–tapping screws
(1.1) we recommend the following procedure for mounting the module
cover (1):
1. Turn the screws in the counter–clockwise direction until you feel
them latch tight
2. Now turn both screws carefully in the clockwise direction.
Opening the
instrument