Moniteur 50 Series SMART Positioners - Manual (Page 6)

Information for the Operator
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01 0-2
The documentation supplied with the instrument is listed in Section 0.5.
This manual is not a permanent part of the scope of supply. For rea-
sons of clarity, it does not contain every detail about every version of
the product described and cannot take every eventuality in installation,
operation, maintenance and use in systems into account. If you require
further information or if problems occur that have not been dealt with in
sufficient detail in this document, please request the required informa-
tion from your local Siemens office or the office responsible for you.
Functionality, commissioning and operation are described in this ma-
nual.
Please pay special attention to the Warning and Note texts. These are
separated from the remaining text by horizontal lines and specially
marked with symbols (see Section 0.2).
0.2 Warning notes
Safety information and warnings are intended to avert danger from the
life and health of users and maintenance personnel and to prevent ma-
terial damage. They are highlighted in this manual by the headings de-
fined here. They are also marked by warning symbols next to where
they appear. The headings used have the following meaning for the
purposes of this manual and the product labels:
!
Danger
indicates death, severe personal injury or substantial property damage
will result if proper precautions are not taken.
!
Warning
indicates death, severe personal injury or substantial property damage
can result if proper precautions are not taken.
!
Caution
indicates minor personal injury or property damage can result if proper
precautions are not taken.