Moniteur 50 Series SMART Positioners - Manual (Page 39)

Preparing for Operation
3-1
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
Preparing for Operation
This Section describes all preparations that are required before the
instrument can be opened.
3.1 Instrument identification (type code)
You will find the order number of the instrument on the rating plate (lo-
cated on the bottom of the instrument) and on the packaging. Compare
this number with the order number in Section 7.1.
☞
Note
To simplify matters, there are no special order numbers for posi-
tioncontrollers and modules for operation as Ex n in zone 2, they
musttherefore be identified with a special rating plate. The procedure
isdescribed in Section 8 of the Installation Guide.
The current firmware version is displayed when you exit the configura-
tion menu.
Fig. 3-1 Firmware version (example: A6)
Mounting or any modules that might be required is described in Sec-
tion 2.5 of this manual.
Firmware version
3