Juniper Systems JS600 - Manual (Page 78)

Page 7-18 PolyTools Program
Transferring Files: Transfer Files Mode
The Transfer Files mode can be used to send or receive data and files between a FieldBook and
a computer.
▲ ▲ ▲ ▲ ▲ Hardware Connections
For your FieldBook to communicate with a computer, you must have a properly wired
RS-232C communication cable. The appropriate cable is available as an optional accessory
from Juniper Systems. Refer to Section 5, Sending and Receiving Information, for details regarding
the cable.
▲ ▲ ▲ ▲ ▲ Communication Parameters
To communicate with each other, both the FieldBook and the computer must be set up with the
same communication parameters (baud rate, parity, data bits, stop bits, communication ports,
and mating call).
Setting up the Computer
The communication parameters for the computer are set up within PolyTools. Select Transfer
Files from the main menu. The following submenu appears:
Edit PolyTran Transfer Files DOS Quit
Set up Parameters
Test Terminal Mode
Send to FldBook
Rcv from FldBook
View Transfer
Choose Mating Call
F1: help ESC: back up RETURN: accept