Toshiba, Tmp87pp24af – Toshiba TMP87CP24AF User Manual
Page 117
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
TMP87PP24A
CMOS
8
-Bit Microcontroller
TMP87PP24AF
The
TMP87PP24A
is
a
One-Time
PROM
microcontroller
with
low-power
384
Kbits
electrically
programmable
read
only
memory
for
the
TMP87CM24A/CP24A
system
evaluation.
The
TMP87PP24A
is
pin
compatible
with
the
TMP87CM24A/CP24A.
The
operations
possible
with
the
TMP87CM24A/CP24A
can
be
performed
by
writing
programs
to
PROM.
The
TMP87PP24A
can
write
and
verify
in
the
same
way
as
the
TMM571000D
using an adaptor socket BM11127 and an EPROM programmer.
Product No.
OTP
RAM
Package
OTP Adapter
TMP87PP24AF
48 Kx8 bits
2Kx8bits
P-LQFP100-1414-0.50C
BM11127
000707EBP1
I For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled
Quality and Reliability Assurance / Handling Precautions.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress.
It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in
making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA
products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set
forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set
forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer,
personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These
TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high
quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury
("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments,
transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of
safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's
own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility
is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third
parties which may result from its use. No license is granted by implication or otherwise under any intellectual
property or other rights of TOSHIBA CORPORATION or others.
• The information contained herein is subject to change without notice.
3
-
24-117
2002
-
10-03