Brother MFC7650MC - Manual (Page 84)

Toner Save Function
This function lets you extend the life of the toner by conserving its use. When the
Toner Save is set to ON, the print appears somewhat lighter. This feature is also
available when copying. The default setting is OFF.
KEYS TO PRESS THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
1 . Press Function.
E N T E R N 0 . & S E T
2. Wait for two seconds.
_______________ _________ J
[1]. FAX
2 . P R I N T E R
3. Press 1 .
l . F A X
4. Press 5.
L J
' 5 . U S E R O P T I O N S
5. Press 7.
.__________________________
7 , T O N E R S A V E
k ____
T O N E R S A V E : 0 F F
c
^ _____________ _______ J
S E L E C T e ^ & S E T
6. Press (left arrow) or (right arrow)
k ________________________ J
T O N E R S A V E : 0 N
to select either ON (or OFF).
Example; ON.
7. Press Set.
7 . T O N E R S A V E
8. Press Stop to exit.
Speaker Volume
There are three settings available for the Speaker Volume, OFF, LOW, or HIGH. This
setting controls the loudness of the MFC’s one-way speciker, which is connected to the
phone line. The initial setting is T.OW
KEYS TO PRESS THE DISPLAY WILL SHOW;
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
1. Press Function.
E N T E R N 0 . & S E T
72