Brother MFC7650MC - Manual (Page 73)

urj/UNS otlMUflNKz?
hAXfcS
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the MFC to check the integrity of a fax
transmission while it is in progress, ECM transmissions are possible only between
machines that both have the ECM feature. If they do, you may send and receive fax
messages that are continuously checked for their integrity.
Sufficient memory must be available in your MFC for this feature to work.
Error Retransmission
Error Retransmission is helpful when the receiving machine does not have ECM,
Even though your MFC cannot check the integrity of the message, it will send the
affected page(s) again after occurrences of accidental noise have caused an error.
This feature is available only for memory transmission, including Broadcast
(see pages 46-47).
THE DISPLAY WILL SHOW:
1. Press Function.
2. Wait tor two seconds.
3. Press 1.
4. Press 5.
5. Press 4.
6. Press (left arrow) or (right arrow)
to choose either ON (or OFF).
Example: ON.
7. Press Set.
8. Press Stop to exit.
09/12/1998 15:25
ONLINE
ENTER N0. & SET
Ш. FAX
2.PRINTER
1. FAX
5.USER OPTIONS
4.ERROR RE-TX
C
ERROR RE-TX:0FF
ERROR RE-TX:0N
4.ERROR RE-TX
SELECT e & SET