Brother MFC7650MC - Manual (Page 111)

UKtUimi IVU-Ov^r^V;?!- N w -L.IVIL.I\ IVtWU'L. UL.I I II MVZ70
TMode Settings at a Glance
MSG CTR MODE WHAT IT DOES WHEN TO USE IT
1) FAX: ON
VOICE : ON
Both voice aod fax Tnes.sagea will he
stored on a “first come, first served”
basis in the memory. Either Fax
Forwardiogor Paging and Pemote
Retrieval of voice and fax messages
is available.
TJsethismodewhen you wish to
store both fax and voice
messages in the memory. Erase
your mp.s.sagos frpqiieTitly to
keep memory available for when
you need
it.
2) FAX- ON
VOICE : EXT.
(External
Answering
Machine is ON.)
Voice calls will be stored in your
external answering machine,
which must be plugged into the
EXT. jack ofthe MFC. Theextemal
TAD wiU answer all your calls;
retrieve voice messages fi:om it as
usual. Paging for voice messages
is not available.
Use this mode when you need
all your Message Center
memory for fax messages or if
you prefer the sound quality of
a tape recorder for your voice
messages.
3) FAX: ON
VOICE: OFF
Voice calls will not be stored. Use this mode when you do not
have to receive voice messages.
4) FAX: OFF
VOICE : ON
All available memory in the
Message Center will be used to
store voice messages. Faxes will
print on paper. You can do Paging
and Remote Retrieval of voice
messages.
Use this mode if you wish to
retrieve voice messages from a
remote location, but can wait
until you are at the MFC to get
your fax messages.
5) FAX: OFF
VOICE ; EXT.
(External
Answering
Machine is ON.)
Fax messages will be received only
on paper, but will iioL be stored in
the memory. Voice calls will not
be stored unless an external TAD
is plugged into the EXT. jack of
your MFC.
Use this mode if you need more
TAD memory than is available
in the Message Center or if you
prefer the sound quality of a
tape recorder.
6) FAX; OFF
VOICE : OFF
Fax messages will be received only
on paper, but will not be stored in
the memory. Voice calls will not
be stored in the memory either.
Use this mode if you do not
want to use the Message Center
memory for receiving fax/voice
messages.
Use 2) FAX: ON, VOICE: EXT. and 3) FAX: ON, VOICE: OFF mode when you want
all available memory to be used to store fax messages (for Fax Forwarding or Paging
and Remote Retrieval). Keep Backup Printing turned OJN to get a printed copy. (See
pages 107-108.)
99