Brother MFC7650MC User Manual
Page 205
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Paper Handling Difficulties
Difficulty
Suggestions
The MFC does not load
paper.
T h e
LCD
shows
CHECK PAPER
or
PRINTER JAM.
•
Check
to
see
if
the
CHECK
PAPER
or
PRINTER
JAM
message appears on the LCD. If so, the multi-purpose sheet
feeder may be out of paper or not properly installed. If it is
empty, load a new stack of paper into the feeder.
• If there
is paper
in
the multi-purpose sheet feeder, make sure
it is straight. If the paper is curled, you should straighten it.
Sometimes it is helpful to remove the paper, turn the stack
over and put it back into the paper tray.
•
Reduce the amount of paper in the multi-purpose sheet
feeder, then try again.
The MFC does not load
paper from the manual
feed stop.
Reinsert the paper firmly, one sheet at a time.
How can I load
envelopes?
You can load envelopes from either the multi-purpose sheet
feeder or the manual feed slot. Your application software must
be set up to print the envelope size you are using. This is usually
done in the Page Setup or Document Setup menu of your
software. Refer to your application manual.
What paper can I use?
You can use plain paper, envelopes, transparencies, labels, and
organizer
paper.
For
information
on
loading
paper.
See
“Acceptable Paper” on page 130.
How can I clear paper
jams?
See “Paper Jams” on pages 170-172.
193