Brother MFC7650MC - Manual (Page 150)

Manual Feed Slot
The multi-purpose sheet feeder also has a manual feed slot. You can manually load
paper, sheet by sheet into this slot. You do not have to remove paper from the multi-
puipuse sheet feeder. Wlieii you use labels or transparencies, be sixre to use this slot. For
information on paper specifications, see “Acceptable Paper” on page 130.
When you load one sheet of paper manually: _________________________
You do not have to choose manual feed in the Setup dialog box of your printer driver.
Insert the sheet of paper in the direction for Portrait or Landscape, placing the side
of the paper you wish to print on face down in the manual feed slot. Align the paper
at the center of the manual feed slot, and be sure to insert it all the way. ((?)) Adjust
the paper guide of the manual feed slot to the paper width you are using. ((?))
When you load more than one sheet of paper manually: __________________
Open the Setup dialog box of the Windows® printer driver and select Manual Feed in
the Paper Source section. Only for Windows® 3.1, 3.11 and Windows®95 follow the
above instructions to load the first page. The MFC will start printing automatically.
After the first page is printed, the dialog box will appear and prompt you to load the
next page. Load a sheet and select OK to resume printing. Repeat these steps until
you have finished printing all the pages.
138