Press function, The display will show, Activity report interval – Brother MFC7650MC User Manual
Page 158
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Activity Report Interval
An Activity Report can be printed at certain intervals tbat you specify. You can set
the journal period to “OFF”, “6 hours”, “12 hours”, “24 hours”, “2 days”, “4 days” or
“7 days”. The Activity Report will list all outgoing and incoming faxes (only the last
50) during that period. The factory default setting is OFF.
After the Activity Report has printed at the preset interval, the information will be
deleted and cannot be recovered. However, at anytime between these scheduled reports,
you can manually print the Activity Report and the information will remain.
NOTE; If your Activity Report is not listing all your transactions, select a shorter
interval period.
KEYS TO PRESS
1. Press Function.
2. Wait for two seconds.
3. Press 1.
4. Press 7.
5. Press 3.
6. Press (left arrow) or ► (right arrow)
to choose the setting.
Example; 12 HOURS.
If you select seven days, you will be
prompted to choose the base day of the
week.
7. Press Set.
8. Enter the time to print in 24-hour format
using the dial pad keys.
Example; 19:45 (7:45P.M.).
THE DISPLAY WILL SHOW:
09/12/1998
15:25
ONLINE
ENTER N0. & SET
[1]. FAX
2.PRINTER
1. FAX
/.SETUP SYSTEM
3.INTERVAL
ACT.RPT.;0FF
C
SELECT ^ & SET
EVERY 12 HOURS
START AT:00:00
START AT:19:45
146