Brother MFC7650MC - Manual (Page 23)

^ vb *./1 1 ^^L-l H I
i\v^\: 7 i^mviiviti>iV :7 AINU HbLP KEY
Level one
function
Level two
function
Explanation of Options Factory
setting
Page
2. REMAINING
JOBS
If you wish to check or cancel a job that
has been set with the timer, a polled job
etc., use this function.
/
49-50
3. PRINT
REPORTS
Seepage 144 for
a list of reports.
You can print several different lists and
reports, which are available under
function item 3. PRINT REPORTS.
/
144-151
1, ONE-rOUCH
DIAL
If you register names and numbers on
One Touch dial keys, you can dial a
number automatically just by pressing a
One Touch key. (Max. of 24 locations)
---
26-27
4. SET AUTO
DIAL
2. SPEED-DIAL
If you register names and numbers as
Speed Dial numbers, you can dial a
number automatically just by pressing
Speed Dial key and a two-digit number
using the dial pad. (Max. of 100 locations)
--- 27-28
3. SETUP
GROUPS
This is used for setting up a group number
used for broadcasting.
- —
29-31
1. SMOOTHING
Smoothing enhances the appearance of
incoming faxes.
If you keep SMOOTHING set to ON, you
will receive messages with the smoothing
enhancement,
ON/OFF
ON 67
2. BEEPER
You can adjust the volume of the beeper
with this function.
OFF/LOW/HIGH
LOW 25
5. USER
OPTIONS
3. COVERPG
ON/OFF
If you set COVERPAGE to ON, you can
send your documents with a Cover Page
generated by your MFC. When the
COVERPAGE setting is ON, you can
select a Cover Page comment.
ON/OFF
OFF 55-56
4. ERROR RE-TX
If you set ERROR RE-TRANSMISSION
to ON, the MFC automatically resends
the page uuee au error uecuis.
ON/OFF
OFF 61
5. REDUCTION
You con avoid having your incoming data
separated by printing a reduced copy of
the incoming document. The reduction
methods are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
AUTO 69-70