Control panel keys, Simultaneous operation, Fficont key – Brother MFC7650MC User Manual
Page 145: Control panel keys simultaneous operation, Ff/cont key, Mw m i1_ ivii w, Rixm\ i ck
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Control Panel Keys
MW M I1_ ivii W
r\0 r\
riXM\ I CK
Printer Status
Simultaneous Operation
Your MFC can print data from the PC simultaneously while eitiier sending or
receiving a fax message with the MFC or scanning into the PC. When your MFC is
copying or receiving a fax on paper, it pauses the PC printing operation until it has
finished.
NOTE: You can not print while PC Fax sending or receiving.
OnlOffLine Key
This key is used to turn the printer on-line (ready to receive PC data) and off-line (not
ready
to receive PC data). If you press this key during printing, the MFC immediately
stops printing even if it has already started to print. It ejects the page, and then enters
the offline status. Press the On/OffLine again and the printer will print the complete
page again.
When the printer is in the online status and the LCD shows ONLINE, you cannot use
PP/Cont
and
Test/Reset
keys.
FFICont Key
________________________________________________________
The upper switch on the control panel can work as the Form Feed (FF), Continue
(Cont) key.
Form Feed
When the LCD shows REMAINED DATA, press On/OffLiiie to tuiii the printer
offline, then press FF/Cont. The MFC prints any data remaining in the printer
memory.
133