Brother MFC7650MC - Manual (Page 24)

Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
6. RCD PAPER
You can select one of 3 sizes of paper. If
you selected AUTO reduction, the MFC
automatically will adjust the size of the
incoming fax document so that it fits the
paper size you have selected.
LETTER/LEGAL/A4
LETTER 68
5. USER
OPTIONS
7. lONER SAVE
You can extend the life of the toner by
conserving its use.
ON/OFF OFF 72
8. SLEEP MODE
This mode reduces the power consumption
when the MFC is idle. The time period
before the MFC drops into the mode is
user selectable.
00-99 minutes
OOMIN 19-20
9. PRINT
DENSITY
You can adjust Print Density with this
function. —-
71
1. TONE/PULSE
There are two diflereiit dial types and
you must select the type of signal suitable
for your telephone line.
TONE/PULSE
TONE 21
2. RING DEUY
This is the number of rings before the
MFC answers the call when in F/T or Fax
Mode.
0/1/2/3/4 rings
2 63-64
3. SPEAKER
VOLUME
You can adjust the speaker volume with
this function.
OFF/T.OW/RTOH
LOW 72-73
6. TEL
OPTIONS
4. FTTRING
TIME
F/T RING TIME sets the “double ring” in
F/T mode.
10/20/30/60 seconds
20 66-67
5. RING VOLUME The settings are OFF/LOW/HIGH. HIGH 74
6. DISTINCTIVE
If you have distinctive ringing service
from your phone company, you can use
this function to register the ringing
pattern of your fax number. And if you set
it to ON, you can use the registered
number as a fax number only.
OFF/ON/SET
OFF 85-87
7. CALLER ID
You can display the last 30 Caller IDs
that are stored in the memory. —
88-89
12