Brother MFC7650MC - Manual (Page 151)

Uv^ll N W II II- tVM r^O
r\
r KM Nil CK
Helpful Hints 1. You may select manual paper feed, paper size, and orientation in
your application software. If your application software does not
allow these settings, you should set them using the RPC program
supplied with your MFC.
2. If you do not select manual paper feed and insert a page in the
manual feed slot, the MFC will load the first page from the manual
feed slot and subsequent pages fi-om the multi-purpose sheet feeder.
3. If your application software does not support your custom paper
size,, select the next larger paper size. Then adjust the print area by
changing the right and left margins in your application software.
4. When you want to stop or clear the manual feed,turn the MFC offline
by pressing the On/OffLine key then, press Shift and Test/Reset,
or you can also stop it with a PC command.
5. When you use manual feed slot, it is best to first press Print
Priority. This allows you to print PC data without interruption
from incoming faxes. Incoming faxes will be stored in the MFC’s
memory. To continue printing PC data, press
FF/Cont after each
page has printed.
6. If bi-directional communication is not operational between the MFC
and the computer, such as when the MFC is shared on a network, the
dialog box to load the next page will not appear. When your MFC is
attached to a network, we do not recommend manual feeding.
FOR YOl IP INFORMATION
Paper Tray
The MFC ejects paper with printed surfaces face down into the paper tray
at the front of the MFC.
When you use transparencies, remove each sheet immediately after printing,
to prevent a paper jam or curled sheets.
139