Connecting the serial interface board (rsioom), R warning, Connecting the serial interface board (ksioom) – Brother MFC7650MC User Manual
Page 185
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
14. OPTIONAL ACCESSORIES
Connecting the Serial Interface Board (RSIOOM)
To connect your MFC to a DOS computer or to an Apple Macintosh computer, you must
first install the optional serial interface board (RSIOOM). When you have installed a
serial interface board, you can share the MFC with two computers, using both the
parallel and the serial interface ports. Automatic interface selection is a standard
feature when using the serial interface board.
Installing the Serial Interface Board into Your MFC
1. Unplug the power cord from the AC
outlet and disconnect the parallel
interface cable.
r WARNING--------------------------------- ----------- --
---------------------------------------- ------ -
Be sure to unplug the power cord before installing or removing the serial interface board.
2. Unscrew the three screws securing
the rear plate of the main controller
board and pull out the main
controller board.
WARNING................. —..... ....................................
Do not touch the surface of the main controller board.
173