Brother MFC7650MC - Manual (Page 22)

Function Selection Table
If you have a basic imderstanding of how to program your MFC, you can perform most
of the programming settings without this Operations Manual. To help you understand
the function selections, options, and settings that are found in your MFC programs,
we have the following Function Selection Table.
Read through this table to gain a basic understanding of what your new Multi-
Function Center can do, and then the next section will begin instructing you how to
use On-Screen Programming.
<1. FAX MENU FUNCTIONS>
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. TIMER
Use TIMER to send your documents at a
later time.
— 44
2. POLLING
Polling is the process of retrieving faxes
ifom another machine. ON/OFF
OFF 92-07
3. CALL
RESERVE
You can send a fax and then talk to the
recipient using the CALL RESERVE
function. ON/OFF.
OFF 58-60
1.TEMP.
(TEMPORARY)
SEHINGS
4. CONTRAST
There axe three types of contrast settings.
Usually the AUTO setting is acceptable.
But if you want to send or copy an
especially light or dark document, you
should change this setting.
AUTO: Default is AUTO. Contrast
setting always reverts to AUTO
after the current operation.
S. LIGHT’.To send very light documents.
S. DARK: To send very dark documents.
AUTO 38
5. RESOLUTION
If you need to send a set of originals at
various resolutions, tlii.s function will
allow you to set the required resolution
page by page. (If all documents are the
same resolution, use the Resolution key.
See page 6 #27.)
STANDARD/FINE/S. PINE/PHOTO
STAN­
DARD
51-52
6. OVERSEAS
MODE
If you have trouble when sending
overseas, you may want to set OVERSEAS
MODE to ON.
ON/OFF
OFF 50-51
7. REAL TIME TX
You can send the documents in the feeder
m real time without using memoiy.
ON/OFF
OFF 41-42
10