Brother MFC7650MC - Manual (Page 119)

I Jfu.1 1 f.i I li IVII_V/\J/ IWL. VxL^I I L_I\ ( V t V _ / | _ / L . I I I I ^ I V u ^ C I
Playing an Incoming Voice Message (ICM) and Recorded Memo
(or Voice Alarm)
KEYS TO PRESS THE DISPLAY WILL SHOW;
VOICE;03 FAX:02
ONLINE
MESSAGE 01/03
ONLINE
9815550101
N
ONLINE
14:00 09/12/1998
O N L I N E
1. Press Play.
(Press Function and then Play for Voice
Alarm.)
- All your incoming messages and
recorded memo 'will be played in the
order they were recorded.
- Duringthe first second that the message
plays, the display will show the current
message number/total n u m b e r of
messages.
- For one second, the MFC will beep and
the Caller ID will flash on the display if
it was received.
- The ICM will start playing and the date
and time it was recorded will appear on
the display.
- You can use ^ (left arrow) to play the
message again. If you press the arrow
during the beeping before the message,
the previous message will be played.
- You can use (right arrow) to skip to
the next message.
2. Press Stop to exit.
NOTE: You can change the speaker volume using Broadcast and Help. (See page 73.)
Backup Printing Option_____________________________ ____ _____
When you choose FAX: ON in the Message Center Mode, all incoming fax messages are
stored in the available memory. The factory setting for the Backup Printing option is set
to ON, so you will also get a copy printed on paper. If you change the Backup Printing
option to OFF as follows, the faxes are stored without a backup copy:
KEYS TO PRESS THE DISPLAY WILL SHOW;
09/12/1998 15:25
ONLINE
1. Press Function. ENTER NO. & SET
107