Brother MFC7650MC User Manual
Page 146
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTE: The MFC periodically will print any data remaining in the memory .
Clearing Errors
If an error occurs, the MFC usually will automatically recover the recoverable errors,
such as a memory full condition. If the error does not clear automatically, press FF/
Cout to clear the error and continue the operation.
TestIHeset Key
____________________________________________________ __
Test Sample Page
This key is used to print a test sample page. If data remains in the printer memory,
press On/Offljine to turn the printer offline and press Test/Reset. The MFC will
print the remaining data first and then will print a test sample page. To print the
printer status lists, see page 151. If the printer is online, the MFC cannot print a test
sample page.
Resetting the Printer
When Reset is pressed together with Shift, it clears data from the memory. The
printer is also reset and restored to the factory default settings. The Reset switch may
be able to clear an error status and the Hex Dump mode. (See page 143.)
Remember that the Reset switch clears data from the printer memory.
Print Priority Key
____________________________________________________
Your MFC has a Flexible memory, which is used for memory transmission, incoming
faxes and printing. When Print Priority is first pressed, it puts the MFC exclusively
in printer mode (LCD shows “PP”). This means that memory transmission using dual
access is not available because all flexible memory is reserved for printing. At the
same time, a Special area of memory is reserved for incoming faxes, so you will not
lose them.
After PC data has been sent and the MFC has completed printing, press Print
Priority again to exit print priority status and return to dual access mode.
134