Brother MFC7650MC - Manual (Page 58)

10. Press Stop.
11. Enter the fax number.
12. Press Start.
The MFC will wait until the specified
time to call.
C
E N T E R F A X N O .
O N L I N E
P R E S S S T A R T K E Y
O N L I N E
N J O F F I C E
O N L I N E
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
Broadcasting
Broadcasting is automatically sending the same fax message to multiple fax numbers.
Using the Broadcast key, you can include up to 24 One Touch locations, up to 100
Speed Dial locations, and up to 50 manually dialed numbers (maximum of 174
locations if you did not use up any locations for Groups, access codes or credit card
numbers). However, available memory will vary with the types of jobs in memory and
number of locations used for broadcasting. If you broadcast to more than the
maximum locations available, you will not be able to set up transmissions using dual
access and the timer.
The easiest way to broadcast is to first combine fi'equently used One Touch and Speed
Dial numbers as a Group, which uses up a One Touch key. (Remember, you can have
Up to six Groups and autodial numbers can be included in more than one Group.) Then
by pressing Broadcast between each location, you can include One Touch, Speed
Dial, Groups, and manual dialing (using the dial pad) in the same broadcast. Use the
Telephone Index to help you choose the numbers easily.
Alter the Broadcast is completed, a Broadcast Report will be printed automatically
to let you know the results.
FOR YOUR INFORMATION
Getting Familiar with the Broadcasting Function
* To stop the broadcast in progress, press Stop. The LCD display asks if you
want to cancel all locations or the location that is being sent.
* Enter the long dialing sequence numbers as you normally would, but
keep in mind that each key counts as one location, so the number of
locations you can call becomes limited.
* If the line is busy or for some other reason a connection could not be made
while broadcasting, the MFC will redial the number aiitnmaticfllly. (See
page 43.)
* If the memory is full, press Stop to abort the job or press Start to send
the portion that is in the memory (if more than one page has been
scanned.) (See page 41.)
46